Dedicated Micros SD26X Bedienerhandbuch

SPEED DOME CAMERA Please read this manual thoroughly before use and keep it handy for future reference. Rev.070514 I

4 The dome camera must be installed by qualified service personnel in accordance with all local and federal electrical and building codes. The syste

5 2.4 Setting Dome Camera Address (ID) To prevent damage, each dome camera must have a unique address (ID). When installing multiple dome cameras u

6 2.5 Setting Dome Camera Protocol If a dome camera is to be installed with a Dedicated Micros KBS3 keyboard, select the switch as the same as the

7 2.6 Connections • Connecting to the RS485/ 422 The dome camera can be controlled remotely by an external device or control system, such as a cont

8 2.7 Getting Started Once installed apply power to the dome camera. The dome camera will start a configuration sequence. OSD Posit

9 3.2 Accessing the On-Screen Menu Utility You can call up the On-screen menu utility on your monitor by pressing PRESET . The DVR displays the fol

10 SPEED(MODE) : NORMAL1~NOMAL9,SLOW VECTOR,FAST VECTOR NORMAL1 (SLOWER) ↔ NORMAL9 ( FASTER) SLOW VECTOR, FAST VECTOR : Move from start point to en

11 3.4 Preset If you need to view specific places routinely, you should program presets. A preset is a programmed video scene with automatic pan, ti

12 5. After aiming the camera (view direction and lens control), press PRESET + 95 again. 6. Then twist the Joystick handle or press ZOOM IN or ZOO

13 3.6 Tour There are 8 programmable Tours. Each Tour consists of up to 42 Preset positions, Patterns, Scans or other Tours (second-level). Using se

II Warnings and Cautions TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MO

14 4. To add a stored preset as a Tour, twist the Zoom handle or press Zoom Key (Programmed preset will scroll). To remove a stored preset from the

15 1. Press PRESET + 95 keys to display the main menu on the monitor. 2. Scroll down to PATTERN and push the Joystick to the right. Or simply press

16 1. Press Menu to display the main menu on the monitor. Select the Alarm option by pushing the Joystick up or down and push to right to enter the

17 4. To adjust panning limit, press the PRESET + 95 keys on the start or end field. Then use the Joystick to go the desired direction. Press the PR

18 3.11 Camera – DM/CAM/SD18X/A, SD26X/A MODEL NOTE: The menu features will vary depending on the camera module installed in your dome camera.

19 • WB (White Balance) CONTROL MODE MANUAL / AUTO / INDOOR / OUTDOOR / ONE PUSH / ATW RGAIN 0 ~ 255 BGAIN 0 ~

20 • LINE LOCK CONTROL MODE INTERNAL / EXTERNAL Adjusts phase of picture with other PHASE 0~255

21 3.12 Camera – DM/CAM/SD22X/A MODEL CAMERA SETUP FOCUS CONTROL WB CONTROL AE CONTROL LINE LOCK CONTROL SHARPNESS : 10 BACK LIGHT : OFF DIGIT

22 • WB (White Balance) CONTROL MODE AWB / WAWB / INDOOR / DOUDOOR / MANUAL WAWB Wide range auto white balance mode. RGAIN 0 ~ 2

23 • LINE LOCK CONTROL MODE INTERNAL / EXTERNAL Adjusts phase of picture with other PHASE 0~255

III FCC COMPLIANCE STATEMENT FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH

24 3.14 Dome Setup CONFIGURATION MENU LANGUAGE SETUP HOME FUNCTION SETUP OSD DISPLAY VIEW ANGLE SETUP INITIALIZE DATA ORIGIN OFFS

25 The Home function can be set so that the camera automatically goes to Preset, Tour, Pattern, Auto Scan after the keyboard controller has been idl

26 to the right or to the left. The Dome camera’s OSD will override this function (Dome camera’s OSD must be enabled). • VIEW ANGLE SETUP

27 • INITIALIZE DATA Erase all stored data from the Flash-ROM of the selected dome camera. You will be asked to enter Yes or No. If you int

28 Appendix A — Specifications Camera (DM/CAM/SD18X/A) Image Sensor 1/4" Ex-view HAD Color CCD (Sony) Picture elements NTSC : 768 x 494 Ap

29 General Certification CE EMC, FCC CLASS A, CSA Electrical Input Voltage 18 to 30VAC; 24VAC nominal, 24VDC Power Requirement 24VAC/VDC 1A Power

30 Appendix B — Troubleshooting If problems occur, verify the installation of the camera with the instructions in this manual and with other opera

31 Appendix C — Glossary Alarm Actions The assigned responses for the dome camera when inputs change from normal to abnormal states. The dome may r

32 IR Mode A feature of the camera that permits manual or automatic switching between color and IR (black-and-white) operation. When IR mode is acti

33 Privacy Zones Masked areas of the dome camera's viewing area. These masks prevent operators of the surveillance system from viewing these de

IV IMPORTANT SAFEGUARDS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do

34 Appendix E — Short Cut Key (Pelco protocol) by KBS3 keyboard Short Cut Key Function PRESET +01~ 32 Go to Preset PRESET + 33 180° Flip (horizo

V Table of Contents Chapter 1 — Introduction...

VI 3.12 Camera – DM/CAM/SD22X/A MODEL ...21 Focus Contro

1 Chapter 1 — Introduction 1.1 Features • 240 Preset positions.(1-32,35-59:by PELCO-P protocol) • 8 Tours consist of Preset, Pattern, Auto-Sc

2 Chapter 2 — Installation and Configuration 2.1 Package Contents The package contains the following. Dome Camera ……………

3 2.2 Connector board of Dome Camera Figure 2 – CONNECTOR BOARD