Dedicated Micros CamVu 500 Betriebsanweisung PDF herunterladen (Seite 6)

CamVu D500 Minidome

POE Injector Cable

The POE Injector cable is designed to enable the use of POE (Power over Ethernet) before a POE capable

switch has been installed. It is installed alongside a suitable 48Vdc PSU that can supply 15W is required -

DM/PSU/48V can be purchased separately from Dedicated Micros.

A Connection to DVR/NVR/Layer 3 Enhanced CCTV Switch

B Connection to suitable 48Vdc 15W PSU - (DM/PSU/48V)

C Ethernet cable connection to camera.

Important: 48V is supplied to connection C. There is no voltage at Connection A. Do NOT

connect an ethernet cable from connection C to the DVR/Layer 3 Enhanced CCTV

Switch as this could cause irreparable damage.

POE Injector Power Supply specication

Adaptor socket - 5.5mm diameter with a 2.1mm central circular pin

+48V goes to the centre pin of the power connector - 0V to the outside barrel

1 2 3 4 5 6 7 8 9 10 11 ... 127 128

Keine Kommentare

Dedicated Micros CamVu 500 Betriebsanweisung Seite 6